Ratel-X Industries® Sand Track Folding Table Brackets are used to connect our Sand Track Folding Table Plate to the side of your vehicle. These can be set to 97 degrees which will suit the Defender Side Panels or to 90 degrees which can be mounted to many other flat surfaces within these angular limits.
Made of 18/8 Stainless Steel and complimented by our durable Matt Black Powder Coated Finish. The hinges are Fully Stainless Steel for strength and longevity. Retention straps are fully stitched for exceptional strength.
Both the STD Sand Track Folding Table Plate and XL Sand Track Folding Table Plate can be used with these brackets when spaced at 889mm Centres (35x 25.4mm pitch on our Slimline Cargo Track) or 1219.2mm Centres (48x 25.4mm pitch on our Slimline Cargo Track) respectively.
Vertical Spacing on the mounting points is 455mm which suits the Defender Side Panels well due to the Folds and cavities inside the vehicle. Convenient mounting positions can be found on the listing for our Slimline Cargo Rail.
Whilst the Slimline Cargo Rail is our mounting option of choice, it should be noted that these brackets can also be mounted to our Round Cargo Anchors or our shorter 127mm Long Cargo Rail. These option will be better suited if you are mounting our Sand Track Folding Table over the Defender Side Windows which will not allow the Slimline Cargo Rail to be fixed at 455mm centres.
These brackets are sold as a pair and come complete with the following parts:
- 2qty Hinged Brackets made of 18/8 Stainless Steel, Matt Black Powder Coated. Bolts for these are Stainless Steel to reduce Galvanic Corrosion.
- 2qty Short Drop-In Screw Fittings for the lower mounting position, and 2qty Long Drop-In Screw Fittings for the upper mounting position. Mild Steel Galvanized.
- 2qty Handwheels supplied with M8x80 Button Head Bolts to attached Sand Tracks or Sand Ladders to your vehicle. Mild Steel Galvanized.
- 2qty Handwheels for locking off your table in the upright position. (These can be upgraded to Locking Handwheels to be ordered seperately)
- 2qty Double Stiched Retention Straps to keep your table in the horizontal position and all relevant fixings.
Please email us if at all unsure and we will do our best to assist with your installation.
Sand Track Folding Table Bracket - Per Pair
Please note that all our Ratel-X Industries products are designed for off road use only.
The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries.
Ratel-X Industries accepts no liability for loss, damage, injury or death caused by and/or resulting from the use of our parts or products.