These Shackle Mounts are made in the United Kingdom. Made from structural steel and comes pre-drilled with 4 fixing holes.  Fully fillet welded and plug welded from the back for superior strength

 

Many rear steel bumpers for Discovery 1 and Discovery 2 models come with holes predrilled at 90x45mm to which can can mount these brackets. Please check your hole spacing before ordering these as you may need to drill four mounting holes if your holes do not suit this configuration.. 

 

  • Manufactured in the United Kingdom
  • Zinc Rich Primer and Semi Gloss Black Powder
  • Universal bracket can mounted to most steel bumpers. Drilling may be required.
  • Fully fillet welded and plug welded from the back for superior strength
  • Structural S275JR Grade Steel - 12mm Baseplate & 20mm Mounting Lug
  • Designed to fit 3.25 Ton 5/8" Bow Shackles with 3/4" Pin Diameter (optional extra)
  • Supplied with grade 8.8 BZP mounting hardware, and also a 5mm thick backing plate.

 

Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries

Discovery 2 Heavy Duty Shackle Bracket 90x45 (Td5 & V8)

£59.50Price
  • Please note that all our Ratel-X Industries products are designed for off road use only.

    The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries.

    Ratel-X Industries accepts no liability for loss, damage, injury or death caused by and/or resulting from the use of our parts or products.